等离子喷涂参数对Ta／W／Sn复合涂层组织性能的影响

采用等离子喷涂方法在LY12铝上制备了Ta/W/Sn复合涂层。研究了各种工艺参数对涂层材料熔化程度和沉积效率的影响。采用扫描电子显微镜观察了复合涂层的表面及界面，精密机械天平称量涂层的增重，力学拉伸机测量涂层的抗拉结合强度，能谱和化学方法分析涂层的化学成分。结果表明，等离子喷涂工艺可以制作组织致密，厚度均匀的Ta/W/Sn复合涂层；喷涂功率和送粉速率对材料的熔化状态影响较大，在特定喷距范围内喷距的影响则较小。     

壳聚糖/磷钙杂化膜的制备与性能研究

将壳聚糖/钙盐复合膜浸泡在磷酸二氢钾溶液中制备了壳聚糖/磷钙杂化膜.用电子扫描电镜观察杂化膜和膜内磷钙微粒的形貌,研究了杂化膜的力学性能、溶胀率、吸光度及热稳定性.结果表明,杂化膜内磷钙晶体为柱状和层状结构,磷钙被包裹在杂化膜内,并与壳聚糖膜形成紧密的连续结构.随着膜中磷钙的质量分数从2.1%增加到8.0%,膜的溶胀率从102%增加到144%,其在200～800 nm波长范围的吸光度也逐渐增加.当磷钙的质量分数为7.0%时,杂化膜的力学性能最佳,其拉伸强度为54.42 MPa、弹性模量为4045.72 MPa、断裂伸长率为4.85%.杂化膜的热分解温度为299℃,高于壳聚糖膜的分解温度290℃.这种具有层状磷钙结构的杂化膜具有良好的生物相容性,可作为一种潜在的支架材料.     

Predicting and interpreting identification errors in military vehicle training using multidimensional scaling

We compared methods for predicting and understanding the source of confusion errors during military vehicle identification training. Participants completed training to identify main battle tanks. They also completed card-sorting and similarity-rating tasks to express their mental representation of resemblance across the set of training items. We expected participants to selectively attend to a subset of vehicle features during these tasks, and we hypothesised that we could predict identification confusion errors based on the outcomes of the card-sort and similarity-rating tasks. Based on card-sorting results, we were able to predict about 45% of observed identification confusions. Based on multidimensional scaling of the similarity-rating data, we could predict more than 80% of identification confusions. These methods also enabled us to infer the dimensions receiving significant attention from each participant. This understanding of mental representation may be crucial in creating personalised training that directs attention to features that are critical for accurate identification.

Practitioner Summary: Participants completed military vehicle identification training and testing, along with card-sorting and similarity-rating tasks. The data enabled us to predict up to 84% of identification confusion errors and to understand the mental representation underlying these errors. These methods have potential to improve training and reduce identification errors leading to fratricide.     

Testing usability and trainability of indirect touch interaction: perspective for the next generation of air traffic control systems

This study aims to determine whether indirect touch device can be used to interact with graphical objects displayed on another screen in an air traffic control (ATC) context. The introduction of such a device likely requires an adaptation of the sensory-motor system. The operator has to simultaneously perform movements on the horizontal plane while assessing them on the vertical plane. Thirty-six right-handed participants performed movement training with either constant or variable practice and with or without visual feedback of the displacement of their actions. Participants then performed a test phase without visual feedback. Performance improved in both practice conditions, but accuracy was higher with visual feedback. During the test phase, movement time was longer for those who had practiced with feedback, suggesting an element of dependency. However, this ‘cost’ of feedback did not extend to movement accuracy. Finally, participants who had received variable training performed better in the test phase, but accuracy was still unsatisfactory. We conclude that continuous visual feedback on the stylus position is necessary if tablets are to be introduced in ATC.     

用于提高谷歌图像搜索结果的二分类器在线学习方法

对于基于关键词的图像检索,利用检索结果的视觉相似性学习二分类器有望成为改善检索结果的最有效途径之一. 为改善搜索引擎的搜索结果,本文提出一种算法框架并且基于此框架着重研究训练数据选择这一关键问题. 训练数据选择过程由两个阶段组成:1）训练数据初始化以开始分类器学习过程;2）分类器迭代学习过程中的动态数据选择. 对于初始训练数据的选择,我们探讨了基于聚类和基于排序两种方法,并且对比了自动训练数据选择与人工标注的结果. 对于动态数据选择,我们比较了支持向量机和基于最大最小后验伪概率的贝叶斯分类器的分类效果. 组合上述两个阶段的不同方法,我们得到了8种不同的算法,并将其用于谷歌搜索引擎进行基于关键词的图像检索. 实验结果证明,如何从含有噪声的搜索结果中选择训练数据是搜索结果改善的关键问题. 实验显示我们的方法能够有效的改善谷歌搜索的结果,尤其是排序在前的结果. 尽早为用户提供更相关的结果能够更大程度的减少用户逐个翻页查看结果的工作. 另外,如何使自动训练数据选择与人工标注媲美仍是需要继续研究的一个问题.     

声学模型区分性训练中的动态加权数据选取方法

提出了一种基于动态加权的数据选取方法, 并应用到连续语音识别的声学模型区分性训练中. 该方法联合后验概率和音素准确率选取数据, 首先, 采用后验概率的Beam算法裁剪词图, 在此基础上依据候选词所在候选路径的错误率, 基于后验概率动态的赋予候选词不同的权值; 其次, 通过统计音素对之间的混淆程度, 给易混淆音素对动态地加以不同的惩罚权重, 计算音素准确率; 最后, 在估计得到弧段期望准确率分布的基础上, 采用高斯函数形式对所有竞争弧段的期望音素准确率软加权.实验结果表明, 与最小音素错误准则相比, 该动态加权方法识别准确率提高了0.61%, 可有效减少训练时间.     

对大学信息技术课程建设思路的探讨

随着社会产业结构的调整，信息技术教育的内容和要求发生了巨大变化，开创新的教育理念和教育方法要从课程建设和师资培养两个方面入手。课程建设是高等学校教学管理工作建设及专业建设的重要内容，师资培养是提高整体教育水平的关键。     

Effects of real‐time visual feedback on pre‐service teachers' singing

This pilot study focuses on the use real‐time visual feedback technology (VFT) in vocal training. The empirical research has two aims: to ascertain the effectiveness of the real‐time visual feedback software ‘Sing & See’ in the vocal training of pre‐service music teachers and the teachers' perspective on their experience with VFT. Forty participants from an undergraduate music teacher education programme were randomly assigned to three groups. The first two groups were assigned the teacher and student versions of Sing & See, respectively, and the third group served as a control group without access to the software. The experimental groups were given 12 weeks to use the software for vocal training on a self‐regulated basis. The technique of complex selections (TCS) was designed to assess the pitch accuracy and richness of vocal timbre. Pre‐ and post‐test singing tasks showed that the participants from the experimental groups significantly improved their vocal timbre. A questionnaire survey conducted after the training period found that most of the participants in the experimental s were positive about the effectiveness of VFT software in vocal training. As future leaders in the implementation of music education technology, pre‐service music teachers expressed a positive attitude towards the use of VFT as a technology‐enhanced learning (TEL) component in music education.     

适用于摩托车零件的多层镍电镀工艺

概括目前我国摩托车零件电镀所用镀层组合，对照有关金属覆盖层的国家标准，认为摩托车零件应用多层镍组合，并提供了工艺配方。     

模拟培训器的应用

简要介绍模拟培训器的应用及其优越性，重点介绍渭河化肥厂模拟培训器的结构，功能，特点及应用情况，并且对培训器中存在问题进行了分析。